3M 466LA 60-10003-1769-7 Trizact Finesse-it Film Disc PSA 3" Grade A3 50-Pcs NOS

Description

3M 466LA 60-10003-1769-7 Trizact Finesse-it Film Disc 3" Grade A3, 50-Pcs. NOS!!
*************************** F R E E
S H I P P I N G ***************************
New - Old Stock.
Item comes in manufactures original plastic bag packaging.
Bag is distressed/dirty and shows signs of shelf/handling wear.
Contents inside are new and perfect condition.  These have a teardrop design for a PSA (Pressure Sensitive Adhesive) backing, the tear drop makes removal of the paper very fast and easy.
Specifications
Abrasive Material: Silicon Carbide
Application: Finishing
Application Category: Paint Prep, Finish & Repair
Attachment Type: PSA
Backing Material: Film
Backing Weight: 3MIL
Brand: Trizact™
Equipment - Machines: Random Orbital Sanders
Form Type: Liner
For Use On: Clear Coats, Paint, Plastic
Hole Configuration: Plain
Industries: AOEM, General Industrial, Marine, Paint Preparation
Max RPM: 10000, 12000
Micron Grade: A3
Overall Diameter (Imperial): 3 in
Primary Application: Paint Prep, Coating & Corrosion Removal
Product Color: Light Green
Substrate: Clear Coats, Paint, Plastic
TDS Required: Yes
Product Details
3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
Ideal for the 3M two-step paint defect repair process for automotive finishes
Well suited for use on mini random orbital sanders to produce a polish-ready finish
Silicon carbide mineral in three very fine micron grades
3M™ Trizact™ Finesse-it™ Film Disc Roll 466LA uses proprietary 3M microreplication technology, micron-graded silicon carbide particles are formed into tiny pyramids of abrasive mineral on a non-compressible 3-mil polyester film backing.
3M™ Trizact™ Finesse-it™ Film Disc Roll 466LA is the clear coat spot repair disc used by automotive manufacturers worldwide.
Fine Sanding and Finish of Automotive Coatings
Available in three grades -- A3 -- 3M™ Trizact™ Finesse-it™ Film Disc Roll 466LA is the clear coat spot repair disc used by automotive manufacturers worldwide. In convenient roll form, these discs are designed for quick access and attachment to rotary tools or orbital sanders.
While it breaks down faster than aluminum oxide, silicon carbide produces a brighter finish. It’s commonly used for defect repair on clear coats, paint and plastics, because it can effectively refine these surfaces without significantly gouging or damaging the workpiece.
Recommended Applications
Machine Sanding
Level/remove the defect using the 3M™ Elite Series Mini Orbital Sander 28737 or the 3M™ Mini Random Orbital Nib Sander 20244 and a 3M™ Trizact™ Finesse-it™ 466LA disc
Spray the disc with water to prevent the abrasive from loading during sanding
Sand the defect for 1 to 3 seconds, depending on its size
Wipe the area clean with a Scotch-Brite™ High Performance Cloth
Hand Sanding
Level/remove the defect using a 3M™ Finesse-it™ Hand Pad and a 466LA disc
Spray the 466LA disc with water to prevent the abrasive from loading during sanding
Sand the defect for 3 to 5 seconds, depending on its size
Wipe the area clean with a Scotch-Brite™ High Performance Cloth
Automotive Finishes
Remove small defects with a 466LA A5 disc. Sand in a circular motion, holding the pad flat to ensure a fine uniform finish.
3M™ Trizact™ structured abrasives are precisely shaped engineered composites evenly distributed and bonded to an abrasive backing.
3M™ Trizact™ Abrasive surface, 50x magnification3M™ Science. Precision Finishing by Design.
3M™ Trizact™ structured abrasives are precisely shaped engineered composites evenly distributed and bonded to an abrasive backing. These extremely uniform abrasive structures can take the form of almost any three-dimensional geometric shape, including pyramids, hemispheres and cubes, designed to enhance grinding performance. While conventionally coated abrasives often have erratically spaced mineral, Trizact™ abrasives are identical in height and orientation, wearing just as uniformly. As they do so, fresh, sharp mineral is exposed to produce a consistent cut and a predictable, fine finish. Altogether, this means fewer rejects and less rework due to out of spec results. Ongoing sharp cutting action minimizes the need to incorporate other abrasives in the sequence, thereby reducing processing steps and enhancing productivity.
In addition to high-performance abrasives, 3M microreplication technology is also used in the manufacture of a variety of 3M products such as overhead projector lenses, reflective traffic signs and solar optical films. It’s science, making your world smoother and brighter.
3M™ Trizact™ Finesse-it™ Film Disc 466LA 3", 50 Count Grade A3 Singles, NOS!!
Thank you for looking!!